This is Roaster cum deep fat fryer; this Machine
is suitable for roasting or deep frying of various Ingredients.
The Roasting is achieved at 1800 C.
UTILITY:
Power Supply, 440 Volts
A.C. 3 Phase 50 Hz. 4 Wire
for Electric Motor / Heater with 32 Amps. Main Switch.
PROCESS DESCRIPTION:
This is a rapid Roasting Machine used for Frying /
roasting Onion, Coriander, Coconut and for removing moisture
& increasing shelf life of Powder, Chemicals, Spices. The
blender consists of outer & inner spiral ribbons supported
on a centrally mounted longitudinal axis. When the agitator
rotates, the material is carried radially around the inside of
the blender. Outer & inner ribbon moves the material in
opposite directions. Thus triple mixing action takes place. The
'Hytherm 500'Thermic fluid oil (H.P. Make) in the jacket is
heated by 2 Nos. Oil immersion Heaters of 3 K.W. Each inserted
from 2 Pockets at the corner of the Mixer. Once the oil in the
jacket is heated, the material in the container is uniformly
mixed or heated by specially designed helical shape Blades. The
impeller is driven by Electric Motor. To avoid heat loss the
jacket is insulated by glass wool & covered with M.S. plate.
The Thermostat inserted in the Jacket controls the Temperature
of the Thermic fluid oil. The Thermostat is connected to the
Control Panel & the Temperature is maintained. It is ideal
to set the Thermostat at 1800 to 1850 C.
JUICE EXTRACTOR
(Hand operated)
GENERAL:
The machine is used to extract the juices from
soft fruits like orange, grapes etc. The machine is conical
screw feeder type with top feeding arrangement and bottom
discharge separately for juice & pulp. All the contact parts
are of Stainless Steel. The machine is available with Hand
operated facility.
UTILITY:
No power Supply required, Hand operated.
CAPACITY
:
The machine capacity is 30 Kg./ Hr.
JUICE
EXTRACTOR (Pulper type)
GENERAL:
The machine is used to extract juice & pulp from fruits
like Mango, Chikku, Papaya, etc. & Vegetables. The
Machine is driven by Electric Motor consisting of rotary blades,
scrapers along with the sieves. The Machine can be used as
Finisher by changing the sieves.
UTILITY:
Power Supply, 440 Volts
A.C. 3 Phase 50 Hz. 4 Wire for
Electric Motor of 2 HP.
